HOBBYWING 1/10 BL 60A S/L Alpa V2.1 059-3060SL
PECIFICATIONS
Continuous current. 60A; coupl Max Power: 180A; BEC voltage: 6,0 V / 1,5 A; cells LiPo: 2-3; Number of NiCd / NiMH: 4-9, Weight: 32g, Dimensions: 31,5 x27, 5x24mm
DESCRIPTION
The AlphaCar-25/35/60A-Regler-Serie is designed for sensorless brushless motors and LiPo-/NiMH-Antriebsakkus. The electronics is controlled by a microprocessor. The software has numerous parameters that can be individually programmed. This allows to adapt the controller for nearly all applications in the car area and provide maximum efficiency for correct interpretation of the powertrain.
FEATURES
• Designed for brushless motors without sensor
• Three modes of operation for all current RC Cars
• Clean start-up and linear control behavior
• Switching BEC
• The firmware can be updated via the USB port
• Easy programming by buttons, alternatively, the controller via the Program Card or the Program LCD box be programmed
• Dust and splash-protected Programmable parameters • Operating mode (forward only, forward-backward, rock crawler mode) • Reverse mode in four performance levels programmable • Brake mode (5 Step ABS, 8 Step Drag Brake, 4 Step Initial Brake) • Start-up behavior (Step 9 from soft to hard) • Timing, 8 levels • protections (under-voltage, overheating, loss of transmitter signal, the engine block) |