Hobbywing XERUN 120A SD V2.1 81020170
TECHNICAL DATA
Continuous current. 120A; coupl Max Power: 760A; BEC voltage: 5.75 V / 3A; cells LiPo: 2-3; Number of NiCd / NiMH: 4-9, weight: 105g, Dimensions: 43x36x33mm
DESCRIPTION
The XERUN controller series is designed for brushless motors and LiPo-/NiMH-Antriebsakkus. The brushless motors can be equipped with or without sensors. The electronics is controlled by a microprocessor. The software has numerous parameters that can be individually programmed. This allows to adapt the controller for nearly all applications in the car area and provide maximum efficiency for correct interpretation of the powertrain.
FEATURES
• Designed for brushless motors with and without sensor
• Regulators will continue to operate if the sensor signal is interrupted
• Clean linear acceleration and control response
• Switching BEC for high loads
• The firmware can be updated via the USB port
• Simple programming through buttons, alternatively, the regulator of the Program or the Program Card Box LCD can be programmed
• Compatible with mechanical braking systems
• Dust and splash proof
programmable parameters
• Operating mode (forward only, forward-backward, rock crawler mode)
• Reverse mode in four performance levels programmable
• Brake mode (Step 5 ABS, Step 8 Drag Brake, Brake Initial Step 4)
• Start-up behavior (Step 9 from soft to hard)
• Timing, 8 steps |