Hobbywing XERUN Combo SCT Pro 81040190
special designed for Short Corse racing
comes with 2 pinions included
TECHNICAL DATA
Engine: Specific speed (KV): 2.250 U / min / V, Power: 1250W; Weight: 340 g, Length: 68.0 mm, diameter 41.0 mm, length of axle: 18,5 mm axle diameter: 5.0 mm
Regulator: continuous current. 120A; Max power coupl: 760A; BEC voltage: 6V / 3A; cells LiPo: 2-4; Number of NiCd / NiMH: 6-12, Weight: 89g, Dimensions: 53.5 x36x36mm
DESCRIPTION
Engine:
High performance brushless motor for models in scale 1:8.
Through its more than 90% efficiency of the engine which has an extremely high efficiency, excessive heating is avoided. The newly developed internal design provides high torque at low total weight of the engine. This allows better acceleration and higher top speeds are reached. A special feature is the sensor port, which is in conjunction with a suitable controller an even more sensitive responses given.
Regulator:
The XERUN controller series is designed for brushless motors and LiPo-/NiMH-Antriebsakkus. The brushless motors can be equipped with or without sensors. The electronics is controlled by a microprocessor. The software has numerous parameters that can be individually programmed. This allows to adapt the controller for nearly all applications in the car area and provide maximum efficiency for correct interpretation of the powertrain.
FEATURES
Engine:
• Aluminium housing
• High-performance magnets
• Solid copper winding temperature
• Efficiency> 90%
• quality ball bearings
• Integrated sensor
Regulator:
• Designed for brushless motors with and without sensor
• Regulators will continue to operate if the sensor signal is interrupted
• Clean linear acceleration and control response
• Switching BEC for high loads
• The firmware can be updated via the USB port
• Simple programming through buttons, alternatively, the regulator of the Program or the Program Card Box LCD can be programmed
• Compatible with mechanical braking systems
• Dust and splash proof
Programmable parameters
• Operating mode (forward only, forward-backward, rock crawler mode)
• Reverse mode in four performance levels programmable
• Brake mode (Step 5 ABS, Step 8 Drag Brake, Brake Initial Step 4)
• Start-up behavior (Step 9 from soft to hard)
|