KYOSHO MINI-Z MR-03 LIMITED YELLOW FULL OPTION CHASSIS SET CHASE MODE 32752
expected delivery week 5
only in Pre-order Free shipping
will be limited version only few made by Kyosho
Specifications
* Length: 124-133 mm * Width: 65-76 mm, height: 35 mm; trace (v & h) *: 56.5 to 63.0 mm * Wheelbase: 86-106 mm; tires (v): Ø25x8 , 5 mm; tires (h): Ø25x8, 5 / 11 mm Weight: 135 grams; Motor: 130 size; radio system: 2.4GHz ASF * The technical data refer to the chassis without a body! Since the chassis is variable in length, width and tire is to be given some data for minimum and maximum values.
RC functions
Gas / brake, steering
Description
The ALL-INCLUSIVE MR-03 chassis tuning kit with CHASE MODE! CHASE MODE limited in a limiter the car's performance to 70%. Is recommended when operating the third transmitter channel at this point the Perfex EX-5UR ASF, the Overtake mode provides an additional acceleration. For three seconds, then we have 100% power. There is the option, known as the Battle with LED Flasher to join. If the LED remains lit, the limiter is active. Blinking indicates that the Overtake mode is active. The percentages in the limiter can be adjusted via ICS interface.
The MR-03 chassis tuning is uncompromisingly designed for racing performance. It is considerably narrower than the MR-02's predecessor and has a much lower center of gravity. This results in significantly higher cornering speeds and a very agile handling. The newly developed front axle chassis gives the maximum mechanical grip and perfect traction in any driving situation.
The Mini-Z Racer MR-03-are equipped with the latest 2.4 GHz wireless technology. It scans the remote control when you turn the entire frequency band and automatically selects a clear channel. Thus the denial of frequencies omitted among the drivers. A total of up to 40 models can be operated simultaneously. In this new system does not come more crystals are used. The frequencies are generated by a PLL synthesizer.
With the new transmission technology, the entire electronics in the MR-03 has been revised. The new processor runs faster and gives the MR-03 in conjunction with the HiSpeed FETs an ultra-fast response. The delivery of the MR-03-racer takes place without the 2.4 GHz transmitter. For the operation of the models is the KYOSHO Perfex KT-18 transmitter, Model No. 82001E required.
At the 2.4 GHz receiver control unit RA-22 may optionally be connected to the piezo gyros DNW-107 to increase the stability of the model. The piezo gyros registered vehicle movement around the vertical axis (skidding), long before they are visible to the human eye and controls within a split second it.
At the front sits a high-resolution digital servo that transmits the steering commands to the transmitter in a split second on the wheels. The servo has a coreless servo motor, the gear ratios in the servo is 94,41:1.
The front wheels are independently mounted and equipped with spring-mounted, double wishbone suspension. The high-grip, low profile tires give the MR-03-Racer uncompromising traction. In conjunction with the extremely low center of gravity is a breathtaking driving dynamics achieved which is in models of this size has never been achieved before.
The Main Board of the MR-03-racer has been standard on the ICS interface. (Not supplied) with a special USB cable and software, the chassis can be configured via a computer. The setup data of the vehicle can be conveniently stored on the hard disk.
The rear axle of the MR-03 chassis is based on proven MR-02 components. Due to the suspension, the chassis is Powerpod very flexible and adapts to any road situation perfectly. The flight batteries are adjacent in the model, whereby the center of gravity is very low.
Features
• MR-03 chassis with CHASE MODE TUNING
• GOLD Limited Edition
• Motherboard with innovative 2.4GHz wireless technology
• Designed for the inclusion of nearly all MR 015 and MR-02 bodies
• HM, MM, RM and LM engine bracket included
• Full ball bearings (MZW-01)
• Golden aluminum locking nuts (MZW-13)
• Golden Ball Differential (MZW-206)
• X-Speed V Motor Tuning (MZW301)
• Oil-filled shocks (MZW-207)
• Tuning front axle springs (MZW-401)
• Tie rod kit included (MZW-402)
• Mini-Z Cup tire gauge (MZW-117)
• New Vorderachslayout with suspension, double wishbones
• High-resolution digital steering servo with coreless motor
• ICS-interface for connection to laptop
• Torsion axle as Powerpod
• Operation is no conventional quartz
• Sophisticated front axle with a lot of mechanical grip and direct turn-in
• High-resolution digital steering servo
• Up to 40 vehicles can be operated simultaneously
• Huge selection of tuning parts and car bodies
• bevel gear differential on the rear axle
• High-grip, low profile tires
• Extremely low center of gravity
• Driving without a pre-constructed chassis transmitter
Required Accessories
• Perfex KT-18 2.4 GHz transmitter, Model No. 82001E
• Matching Mini-Z body + body mounts
• 4 pcs AAA 900mAh Team Orion AGM batteries, Order No. ORI13202 (model)
• 4 pcs 1100mAh RT AAA Team Orion batteries, Order No. ORI13201 (transmitter)
• Charger
|
