TEAM ORION ADVANTAGE TOUCH ORI30185
Specifications
Input voltage 11-18VDC / 100-240VAC; cell types: NiMH / NiCd 1-15 cells LiPo / LiFe / 1-6 cells Li-Ion, Pb 2-20V, load current: 0.1A to 5A (50W) Discharge current: 0.1A to 1A (5W) Dimensions: L170xB158xH45mm; Weight: 662g
Description
Touch-loading technique in PERFECTION!
With the Team Orion Advantage Touch presents a highly accurate and innovative touch-chargers. Equipped with a 400x240 pixel TFT screen sets new standards for this high end device.
Spectra TFT color screen
In selecting the components of the new Advantage Touch charger was taken on the best quality. When a screen 400x240 pixels large TFT color screen is used. It is dimensioned to the ATTS special software for easy operation with your finger perfectly portray. The sensitivity of the touch control is optimally adjusted to the control commands from the user quickly absorb and implement.
HPC High Precision Processor Charging
Fully recharged our batteries to be perfect, but not overloaded. Even deep discharges must be prevented. We have optimized the loading and unloading process in detail, in order to achieve just that. The high-precision processor controls all current flow to allow the gentle treatment of your batteries, yet still get maximum performance.
ATTS Advanced Touch Technology Software
The ATTS software was developed specifically for the Advantage touch. It was the simple operation of the device in the foreground - with the involvement of the new way of operating on the color touch screen. Thanks to the innovative screen design, it is possible, every function of the charger, the battery recall after a single acquisition, with just one keystroke. Finally, you can use simple and complex loading functions.
Advanced Balancing
The Advantage Touch charger is equipped with a stand-alone balancing function. This allows the balance to your lithium batteries as needed, without making a charge / discharge. The process is shown graphically. Data as the single cell voltage, internal resistance and the time duration of the operation are read.
Graphics Engine
The charging and discharging process can be represented graphically. The charge-discharge curve and says a lot about the characteristics of a battery: it is, for example, batteries that last a high voltage level, and this only at the end suddenly collapsed, while others lose steadily and slowly on battery voltage.
Dual Power Input
The Advantage Touch charger is ideal for use at home and-go. The device can be connected either to a 100-240V AC outlet or a 11-18V power source (eg car battery). This gives maximum flexibility and to buy a separate power supply is eliminated.
Charge Assistant
For those who are not familiar with the rapid charging of LiPo, LiFe, LiIon, NiMH, NiCd and Pb batteries, the charger Advantage Touch is equipped with a wizard. It allows you to configure the device in a few steps for each battery. Any other function can then be started with just one touch.
Multi-Language Software
The menu language of the charger is available in German, French, English, Italian and Japanese. On our website www.teamorion.com, voice files can be downloaded to customize the language to suit your needs. On www.teamorion.com / touch for more information.
Upgradeable firmware via USB
The Advantage Touch charger is equipped with a USB port. With the included USB cable, you can as easily update the software of the device. Keeps you on the cutting edge of technology - the device retains its value even with new technical developments and charging procedures.
Features
• Touch screen with 400x240 pixels charger TFT Color Monitor
• Compatible with LiPo, LiFe, LiIon batteries with 1-6S, NiMH and NiCd battery packs with 1-15 cells and lead acid batteries with 2-20V
• charging current of 0.1-5A (50W)
• discharge current of 0.1-1A (5W)
• Dual input single connection to 100-240VAC and 11-18VDC power source
• Innovative touch screen ATTS-optimized software
• High precision HPC-loading system for precise full charge
• Upload Wizard
• Loading, unloading, formatting, storing, balances
• Formation options: Load-> Discharge, Discharge-> Charge, Discharge-> Load-> Discharge
• Visual representation of a Entlade-/Lade-Graphen
• Stand-alone balancing function
• balancing function (selectable)
• External Balancing Board for XH, TP/FP-, EH and HP / PQ-balancer connectors
• TRX, Deans, Tamiya, BEC, Futaba charger cable and alligator clips included
• Multi-Language Menu (upgradable via USB port)
• Connection of an optional temperature probe
• Adjustable delta peak value
• Adjustable Trickle Charge
• Compact size
|
