37,95 inc. BTW

Op voorraad

Qty
Stel een vraag over dit product

Hudy CHASSIS DROOP GAUGE SUPPORT BLOCKS (30 MM) FOR 1/8 OFF-ROAD-TRUGGY (2) 107704 Proper chassis droop is a critical yet frequently overlooked set-up feature of modern 1/8 off-road cars and truggies. It is essential for proper handling of the car to get balanced down travel on each side of the suspension and as such HUDY is the first RC company to develop and produce the first purposefully-designed 1/8 Off-road large-size droop gauge support blocks. Using the support blocks is super easy. Simply remove the tires from your buggy and using flat HUDY Set-up Board #108202 put the car chassis on the support blocks; place the front support block below the servo saver, and place the rear support block below the rear suspension mounting. Using the #107711 HUDY Chassis Droop Gauge with elevated scales, measure the droop under the wheel axle hex. Use the downstop screws to alter the suspension droop on each side of the car; the shocks should extend out far enough that they do not limit the suspension arm movement. Ensuring equal and proper suspension droop will allow the car to achieve a proper traction level and weight transfer depending on track conditions. Please refer to your's car set-up book to learn more about how to adjust the droop of your buggy. • chassis droop gauge support blocks (30mm) for 1/8 off-road cars • allows adjustment of front/rear droop when used with #107711 HUDY Chassis Droop Gauge • CNC-machined, made of high-quality lightweight duraluminum and stylish look • 2 pieces in a set