2.299,00 inc. BTW

Op voorraad

Stel een vraag over dit product

Amewi Hydraulic Wheel loader 1/16 Complete Ready to Run 2.4Ghz 22560

Delivery 3-5 days only on special order

 

Hydraulic scale replica of a well-known wheel loader (model K966) in full metal with lockable differentials, 2-speed manual transmission and swing axle for a perfect driving experience. This wheel loader on a scale of 1:16 with a weight of approx. 11kg in connection with the high-grip rubber tires and the very fast hydraulic articulated steering allow use on almost any surface. The power of the boom, the brushless drive and the shovel are above average compared to their own weight and enable problem-free work even with heavy material such as earth, gravel or other bulk material. A total of ten functions can be controlled via the included high-quality 2.4GHz transmitter.
The hydraulic pump is a high-performance pump with an overflow valve and a flow rate of approx. 400ml/min. The pressure is adjustable and the hydraulic system is equipped with 3-way switching valves and an air-oil cooler. The power, speed and maneuverability of this model is significantly higher than that of wheel loaders with e.g. electric spindle drives – which closes the gap between entry-level models and high-quality functional model making. It is perfect as a transition from our electric 1:14 wheel loaders to the functional models of the upper class.

Highlights:
Hydraulic fast articulated steering: For maximum maneuverability on any surface
Differentials that can be locked via a transmitter: Give the model maximum driving power in difficult terrain
2-speed gearbox that can be switched from the transmitter: For different speeds and perfect power transmission off-road

Other features:
Full metal model with a very high dead weight
High-quality brushless motors on the drive and the hydraulic pump
Easy access to the electronics and battery thanks to a large maintenance hatch at the rear
High grip rubber tires for good traction on any surface
4WD all wheel drive
LED lighting
Large 7500mAh 7.4V battery included
220V plug charger included
Noble 16-channel transmitter 2.4Ghz included
The model is already bound and adjusted, just fill up with oil to get started
Hydraulic oil included

Technical specifications:
Scale: 1:16
Length: 575mm
Width: 180mm
Height: 210mm
Weight: about 11kg
Wheelbase: 221mm
Front track width: 182mm
Rear track width: 185mm
Ground clearance: 34mm
Front wheels: outer diameter/width 105/38mm
Rear wheels: outer diameter/width 105/38mm
Rim diameter: 56mm
Transmission: 2-speed metal gear
Brake: electronic
Controller: brushless
Motors: brushless
Drive system: Cardan
Steering: Hydraulic
Main material: metal
Battery compartment dimensions: 72 x 36 x 52mm
Battery: Li-Ion, 2S, 7.4V, 7500mAh 15C, soft case, XT30 connector LxWxH: 65x55x35mm, 284g
Driving time: approx. 30-45 minutes, depending on the intended use and the surface
Top speed: approx. 9 km/h in second gear
Remote control: 16 channels 2.4GHz
Range: about 150m
Charger: 220V plug-in charger for 2 and 3S batteries with balancer connection and 1.5A output
Charging time: about 3-4 hours depending on the battery condition

Scope of delivery:
model
Channel
battery pack
charger
hydraulic oil
filling bottle
bind plug
Operating instructions DE/EN

Required accessories:
4x 1.5V mignon AA batteries for the transmitter