PulseTec Charger Mega 200 Duo – 200W 2x12A PC-019-003

PulseTec Charger Mega 200 Duo – 200W 2x12A PC-019-003

MEGA 200 DUO

The MEGA 200 DUO is a high-performance, micro processor control charge/ discharge station with battery management suitable for use with all current battery types, with integral equalizer six-cell Lithium-Polymer (LiPo), Lithium iron phosphate (LiFe) and Lithium-Ion (LiIon) batteries; maximum 12A charge current.

The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage 4.35V. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.

The MEGA 200 DUO is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time, the synchronization mode is available, in which users could perform synchronous settings for charging same batteries simultaneously to offer time-saving benefits.

The PULSETEC MEGA 200 DUO AC/DC is a dual-channel charger with two independent circuits and fully loaded with incredible features – unique in his price range. 
Special Features:
Twin-channel Charger
The PULSETEC MEGA 200 DUO allows you to connect 2 batteries to one charger simultaneously,
the charger will intelligently and automatically charge 2 batteries at once to their
maximum capacities. The batteries being charged do not even need to have the same cell
configuration or same battery chemistry. You can connect different chemistry (NiMH/NiCd/
LiPo/LiFe/Lilon/LiHV/Pb) batteries to any of the charging channels. Power of each channel
is 100W.
Optimized Operating Software
The PULSETEC MEGA 200 DUO features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user’s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs
of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users.
Balance Voltage Calibration
The PULSETEC MEGA 200 DUO allows you to calibrate the balance voltage directly on the device with a 6S LiPo battery.
Memory of Last Operation
The PULSETEC MEGA 200 DUO will memorize your last operation of charging/discharging before power cut.
AGM Charge and Cold Charge
For Pb batteries, there are two more charging modes: AGM charge and Cold charge.
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for each channel. You can
keep the data pertaining to program setting of the battery of continuous charging or discharging.
Users can call out these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
Balancing Individual Cells Battery Discharging
During the process of discharging, MEGA 200 DUO can monitor and balance each cell of the
battery individually. Error message will be indicated and the process will be ended automatically
if the voltage of any single one cell is abnormal.
Fast Charge Mode and Storage Mode of Lithium Battery
Special modes for specific needs. Fast Charge reduces the duration of charging. Storage
Mode lets you control the final voltage of your battery as preparation for long time storage in
order to prolong the usable lifetime of the battery.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak-charge the battery once, twice or thrice in a
row automatically. This is good for making certain the battery stays fully charged.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable
for battery refreshing and balancing to stimulate the battery’s activity.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or NiCd
battery, it is useful for the NiMH battery of low impedance and capacity in the ‘AUTO’ charging mode.
Battery Voltage Meter
The user can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage.
Battery Internal Resistance Meter
The user can check battery’s total internal resistance and each cell’s internal resistance.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the
charging capacity exceeds the limit, the process will be terminated automatically when you
set the maximum value.
Temperature Threshold*
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If
the temperature limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not included
Processing Time Limit:
You can also limit the maximum process time to avoid any possible defect.

SPECIFICATIONS
Input voltage (AC/DC): 100-240V AC / 11-18V DC
Battery Type: LiPo/LiIo/LiFe/NiCd/NiMH/Pb
Max. Charge Power (Watt): 2x 100W
Charge Current (A): 2x 0.1 – 12A
Max. Discharge Power (Watt): 2x 10W
Discharge Current (A): 2x 0.1 – 2A
Display: 2×16 LCD
Nr of Li-xx Cells: 1-6
Nr of Ni-xx Cells: 1-15
Nr of Lead acid cells: 1-10
Balancer load (mA): Max 500mA/cell
Balancer Connector Charger: XH
Programmable Cut-Off Voltage: Yes – charge/discharge adjustable
Battery Storage program: Yes
Battery Memory: Yes – 10 charge/discharge profiles
Audible Alarms: Yes
Cooling Fan: Yes
Case Material: Composite Case
Sensor: Optional Temp. sensor