ProLine Dumont Paddle for Stampede Preglued Sand/Snow Tires (2) 10193-10

ProLine Dumont Paddle for Stampede Preglued Sand/Snow Tires (2) 10193-10

Product Details

Key Features
Extreme Paddle Tires for Sand and Snow
Pro-Line P-L Logos Embedded into Tire Carcass
Incredible Performance and Style!
Removable Hexes Allow you to Change Wheel Offsets on the Fly
Easily Replace Damaged Hexes or Upgrade to 17mm hexes

 In The Box
(2) Pre-mounted Dumont 2.8" Sand/Snow Tires on Raid Black 6×30 Removable Hex Wheels
(2) 6×30 to 12mm Hex Adapters (Narrow)
(2) 6×30 to 12mm Hex Adapters (Wide)
(12) M3 x 12mm long SHCS hardware

Overview
This is a pair of pre-mounted Dumont 2.8" Tires on Raid Black 6×30 Removable 12mm Hex Wheels. Are you ready for the most extreme 2.8" Paddle tires Pro-Line has ever made for 1:10 Monster Truck? Introducing the Dumont 2.8" tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!

The Dumont 2.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:10 Monster Truck today!

Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.

The Dumont 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable 12mm Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4×4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes) or even upgrading your wheels to 14mm (PRO634700 Sold Separately) or 17mm wheel hexes (PRO633600 Sold Separately) for extreme use! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6×30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere!

Please note: All tires & wheels are sold in pairs, unless otherwise noted

Features
TIRE FEATURES
Extreme Paddle Tires for Sand and Snow
Latest Paddle Tire Technology – Large Offset V-shaped Tread
Pro-Line P-L Logos Embedded into Tire Carcass
Incredible Performance and Style!
Made from Very Stiff and Long-lasting Paddle Tire Rubber
Foam Inserts Included
Made in the USA, since 1982

WHEEL FEATURES
Removable Hexes Allow you to Change Wheel Offsets on the Fly
Easily Replace Damaged 12mm Hexes or Upgrade to 14mm or 17mm hexes
The 2 Most Common 12mm Offsets are Included
Fits any of Pro-Line's 6×30 Removable Wheel Hexes
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Made in the USA, since 1982

Fits
Stampede® 2wd
Stampede® 4×4
Granite™ (ARA102727, ARA4202V3 and ARA4302V3) with the use of optional 14mm Hex Adapters (sold separately)
Other 1:10 Monster Trucks with 12mm Hexes
Check out optional plastic & aluminum 6×30 hexes (sold separately) to fit other trucks!

12mm (Plastic narrow & wide PRO633500 or Aluminum narrow PRO633700 & wide PRO633701)
14mm for ARRMA Vehicles (Plastic PRO634700 or Aluminum PRO634600)
17mm (Plastic PRO633600 or Aluminum PRO633800)