Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500

Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500
Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500
Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500 - Afbeelding 3
Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500 - Afbeelding 4
Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500 - Afbeelding 5

€ 106,90 inc. BTW

Uitverkocht

Wil je een (vrijblijvende) email krijgen als dit product weer op voorraad is?

Stel een vraag over dit product

Hobbywing Ezrun MAX10 G2S ESC Sensorless 140Amp 2-4S LiPo 30102500

The Ezrun MAX10 G2S is the consistent evolution of the MAX10 G2: identical power ratings, identical case – but an ESC that can be set up without any additional hardware. The Bluetooth module sits inside the power switch, the connection to the smartphone runs through the HW LINK app, and parameter setup, data review and firmware updates all run through it.

In sensored operation the ESC delivers linear, stable power across the entire speed range: strong on launch, precise in slow technical sections and consistent under sustained full throttle or over jumps. The housing with its integrated heatsink and the frameless fan, which discharges its air out of the sides, keep temperatures down. The fan stays off while temperatures remain low and only starts once a preset threshold is reached.

Three things are new compared to the MAX10 G2: the integrated Bluetooth, the internal data logging and the third BEC step of 8.4V for high-voltage servos.

Features

  • Bluetooth module integrated into the power switch – programming straight from a smartphone, no extra devices
  • Internal data logging of the last 10 minutes of runtime, reviewed graphically in the HW LINK app
  • Turbo timing up to 32 degrees – up to approx. 25% higher maximum RPM with an Ezrun 3652/3665 G3 motor
  • Three-step BEC: 6V / 7.4V / 8.4V at 5A in switch mode
  • Frameless fan with side air discharge, switched in by temperature
  • Waterproof sensor interface, dust- and waterproof to IP67
  • Capacitor overheat protection
  • Two programming routes: Bluetooth app or LCD program box
  • Firmware upgrade via the app
  • Protection against low voltage, overheating and loss of signal

Technical Specifications

Type 1/10 brushless, sensored and sensorless
Current (cont./peak) 140A / 880A
Input Voltage 2-4S LiPo
BEC 6V / 7.4V / 8.4V adjustable, 5A continuous (switch mode)
Motor Types Brushless motors with and without sensor
Motor Limits 2S LiPo: KV <= 6000 (3652 size motor)
3S LiPo: KV <= 4000 (3665 size motor)
4S LiPo: KV <= 2600 (4268 size motor)
Turbo Timing up to 32 degrees
Fan Yes, powered by the BEC
Programming Bluetooth (HW LINK app)
LCD program box
OTA program module
Programming Port Separate, 3-pin
Waterproof Yes, to IP67
Input XT60
Output Gold bullet sockets
Dimensions 53 x 39.5 x 37.2 mm
Weight 125 g (incl. wires and connectors)
Application 1/10 Short Course Truck, Truck and Monster Truck

Note: A 3S battery or larger is required for 7.4V or 8.4V at the BEC. Turbo timing and motor overheat protection only work with a supported Hobbywing motor, for example the Ezrun 3652/3665 SD G3. The effective Bluetooth range is approx. 5 m by design.

Delivery

  • 1x Ezrun MAX10 G2S ESC 140A

Gerelateerde producten